View unanswered posts | View active topics It is currently Thu May 02, 2024 9:00 pm



Reply to topic  [ 4 posts ] 
1998 TJ For Sale 
Author Message
JT4x4
User avatar

Joined: Sat Oct 17, 2009 9:41 am
Posts: 90
Post 1998 TJ For Sale
I hate to do it, but just found out last week that I'm losing my job so the toy is going to have to go.

1998 Jeep Wrangler Sport
4.0 5 Speed 194,??? miles

Rear Dana 44 4.56 gears, Detroit Locker, disk brakes
Front HP Dana 30 out of an XJ with 4.56 gears and Lock-Rite
Custom bumpers with winchplate on front and swing-out on rear
Rubicon Express 3.5” lift
Bilstein shocks, front swaybar disconnects
PSC Steering Box / Kilby Steering Box skid
JKS 1.25” body lift and 1” Motor mount lift
NP231 with slip yoke eliminator and Tom Woods CV driveshaft
JCR 1-ton steering system UTK
33x12.50.15 BFG Mud Terrains with aluminum wheels
Rock Sliders
Kilby fuel tank skid plate
Fabtech rear corner guards with LED sunken taillights
CJ style front turn signal lights / Flat-fendered front
Soft top with full steel doors
Hard top in excellent shape, but needs to be painted to match
Factory AC converted to on-board air

Recent Work in past 2 years
Radiator, water pump, thermostat, upper and lower hoses replaced
TPS replaced
Battery replaced
Alternator replaced with 90amp high output
Trans fluid, transfer case fluid and diff fluid all changed.
Front and rear brake pads replaced
All oil changes done at 3k miles
Have maintenance sheet available upon request

Extra Parts that come with it
Replacement bushings for RE control arms
Rear shock outboarding kit
New Pitman Arm
New BDS 4.5” coils for all the way around
Used BDS lower rear control arms (Uppers already replaced)

Work it Needs
Needs catalytic converter and rear 02 sensor to pass CT inspection
Needs the bushings put in the control arms and front end tightened up

It runs great, shifts great, but is very sloppy and feels loose when driving. BDS upper rear control arms installed when one of my upper RE control arms stripped out and I never got around to replacing the lowers to match so I know they are not adjusted properly. The pitman arm has play and that is why I have a new one and the control arm bushings in the front probably need to be replaced and they come with the Jeep. Currently is not registered or insured. Just found out that I’m losing my job and can’t afford to put anything more into the toy.

$6,500 OBO

Image
Image


Thu Aug 25, 2011 9:51 am
Profile
JT4x4
User avatar

Joined: Sat Oct 17, 2009 9:41 am
Posts: 90
Post Re: 1998 TJ For Sale
I can't figure out how to edit my post above so I'll give it a bump and post that the price has now been dropped to $5800 OBO.


Mon Oct 10, 2011 12:48 pm
Profile
HV4W
User avatar

Joined: Sun Oct 24, 2010 7:48 pm
Posts: 286
Post Re: 1998 TJ For Sale
If I hadn't lost my job as well I'd be all over that. Love those classic slotted mags. Those are the first ones I've seen on a TJ. I have them on both my CJ's. Someday we'll try one of those newer jeeps but now is not the time. Good luck.


Wed Oct 12, 2011 8:16 pm
Profile
JT4x4
User avatar

Joined: Sat Oct 17, 2009 9:41 am
Posts: 90
Post Re: 1998 TJ For Sale
The TJ is now sold. It was really sad watching it get loaded on the trailer. Hopefully if the job situation brightens up I'll be in the market to replace it early next year.


Mon Oct 31, 2011 1:57 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF