A buddy of mine moved and us getting out if the sport. Here are some parts.


TJ Buggy Part Out
3.5 Shortstar Motor- New SchoolOBD1 Harness-270hp, 255 torque -Motor was just freshened up with new valvecover gaskets and plugs. Comes with Fuel Pump -$500
Rusty Bray Built Torquflite- 904trans with Manual Valve Body and Flexible Lockable Dipstick Tube-60 degreebellhousing- $400
XRC Dual Pass Custom AluminumRadiator with Spal Fan. $200
Art Carr Shifter –Standard ValveBody Layout with Plastic Stand $125
Stak- 3.8 T-case with 35 spline outputs., Comes with longer twin sticks. 1350 yokes, Rear T-case frame support. $1500
1350 Non CV -Drive Shafts frontand rear. $300.-Will work a deal if you buy the Stak.
D60 Dodge Front -4;88 gears,Lockright, 35 spline inners and 35 spline chromo outers, drive slugs, 5 on 5.5conversion, diff cover, high steer, 1350 Yoke. This will bolt into a TJ with the exception of Coils. 67” wide-$1300
D60 Ford Narrowed Rear- Shaved, Trussed and setup for upper triangulated 4 link., 4:88 gears, Detroit, Moser 35 spline shafts, Disc Brakes,1350 Yoke, 60” width. 5 on 5.5 boltpattern- $1000
4- Alcoa Aluminum Forged Wheels with TrailReady Beadlocks on 37 BFGoodrich Krawler Reds . Approx. 50% tread-$1400.
PSC steering –Single Ended Ram, PSCOrbital, PSC Big Billet Reservoir, Finned Aluminum Cooler and Steering Columnwith quick release-Momo Wheel. $450. You will get a complete Hydro Setup exceptfluid.
Mastercraft Rubicon Seats and Mastercraft2’Harnesses. $325
Fox 2.5 inch Air Shocks front 12”travel-$425 pair
Fox 2 inch rear air shock 12” -$350pair
Nitrogen Tank-$100
RCI 15 Gallon Fuel Cell with 3walbro pickups-$125
Wilwood Brake Setup with frontand rear masters and pedal –Brand New $200
Warn XD9000i winch with Rope.$600
Piaa Pro 80 XT headlights. $100
TJ Tube Chassis complete with all tabs and aluminum skins, Hood and Grill. $1500- Comes with Tabs and approx. $400in Aluminum sheeting. The cage is made up of 1.75, 1.5 and 1.25 Dom. Front bumper and rockers are sleeved with 1.5 Aluminum tube inside the 1.75 Dom. It is built like a tub so tube maintenance in the future should be easy. It also has double B pillars so you know it’s legit.

All the tube work is finished-Most of the interior panels are cut including the dash, floor and roof is mounted.

I will be in LBI on June 8th for a wedding and could possibly bring lighter smaller parts. All parts are located in Hampstead NC
Link to gallery
http://RobertKosinski.zenfolio.com/p712063327


p1364108402-4.jpg
p786873967-3.jpg

email Robert.Kosinski@plygem.com or call/text with any questions 201-602-4853. Thanks Rob K
Robert Kosinski
http://robertkosinski.zenfolio.com/
http://www.youtube.com/user/rocksteadyrobk
Reply With Quote